Single Pc.
Sq. forged body full bore High pressure design Ball Valve
|
Size
: 3 mm to 50 mm
End Conn. : BSP / NPT
Test Press : 140 Kg / Cm² to 550 Kg / Cm²
Material : C.S., S.S., Brass etc |
 |
Single Pc.
Sq. forged body full bore Medium pressure design Ball Valve
|
Size : 3 mm to 75 mm
End Conn. : BSP / NPT
Test Press : 70 Kg / Cm² to 350 Kg / Cm²
Material : C.S., S.S., Brass etc
Panel Mounting arrangement available on Request. |
 |
Single Pc.
Round body full bore / RB design Ball Valve
|
Size : 15 mm to 100 mm
End Conn. : BSP / NPT
Test Press : 35 Kg / Cm² to 100 Kg / Cm²
Material : C.S., S.S., Brass etc |
 |
Single Pc.
hex body full bore / RB design Ball Valve
|
Size : 6 mm to 25 mm
End Conn. : BSP / NPT
Test Press : 35 Kg / Cm² to 100 Kg / Cm²
Material : M.S., S.S., Brass etc |
 |
3 way, 4 way
Ball Valve in full bore design with 'L' or 'T' port
|
Size : 15 mm to 100 mm
End Conn. : BSP / NPT, Flanged ends as per
BS, ASA or DIN standard up to
300# rating.
Test Press : up to 50 Kg / Cm²
Material : C.S., S.S., Brass etc |
 |
Three Pc.
Sq. body full bore design Ball Valve
|
Size : 6 mm to 75 mm
End Conn. : BSP / NPT, Socket weld, Butt weld
Test Press : 35 Kg / Cm² to 150 Kg / Cm²
Material : C.S., S.S., Brass etc |
 |
Three Pc.
Round body full bore / RB design Ball Valve
|
Size : 15 mm to 100 mm
End Conn. : Flanged ends as per BS, ASA or
DIN standard up to 1500#
rating.
Test Press : 25 Kg / Cm² to 200 Kg / Cm²
Material : C.S., S.S., Brass etc |
 |
Single Pc.
round body full bore / RB design Ball Valve
|
Size : 15 mm to 75 mm
End Conn. : Flanged ends as per BS, ASA or DIN
standard up to 300# rating.
Test Press : 25 Kg / Cm² to 100 Kg / Cm²
Material : C.S., S.S., Brass etc |
 |
2 way high
pressure full bore design Ball Valve
|
2 way high pressure
full bore design Ball Valve with pre-compressed seal & SS-304
internals most suitable for power pack, high pressure
hydraulic & pneumatic lines etc.
Size available : 10 mm to 50 mm ( 3/8", 1/2", 3/4", 1", 1
1/2", 2" BSP / NPT )
Working Pressure Range : Up to 500 Bar |
 |
2 way low
pressure reduced & full bore Ball Valve
|
2 way low pressure
reduced & full bore Ball Valve with SS-304 internals PTFE
seals & malleable iron level excellent performance &
zero-leakage in air, steam, gases, oil, chemical etc.
Size available : 6 mm to 50 mm ( 1/2", 3/4", 1", 1 1/2", 2"
BSP / NPT )
Working Pressure Range : 70 Bar |
 |
One way /
Non Return Valve
|
One way / Non Return
Valve with SS-304 piston viton 'O' ring and silicon steel
spring suitable for any type of hydraulic or pneumatic
application.
Choice of cracking pressure : 5 PSI to 50 PSI
Size available : 6 mm to 25 mm ( 1/4", 3/8", 1/2", 3/4", 1"
BSP / NPT )
Working Pressure Range : 200 Bar |
 |
Top |
